Blanke SECUMAT Mat
BLANKE SECUMAT is constructed from a fiberglass reinforcing mesh embedded between two layers of polyester fabric.
$ 224.60 – $ 698.00
Item No.: 758-904
attribute_pa_size: large-secumat-roll-538-sq-ft-1-30-sq-ft
Item No.: 758-904-15
attribute_pa_size: small-secumat-roll-161-sq-ft-1-52-sq-ft
BLANKE SECUMAT is a tear-resistant sandwich polyester membrane with a stable fabric-reinforcing liner used for uncoupling purposes below ceramic and natural stone coverings on wall and floor surfaces in indoor areas. It is distinguished by a low installation height and absorbs stress loads emanating from the substrate. Tensile and shear stresses are not transmitted to the upper covering.
Shipping & Delivery Times
To determine approximate delivery time for your order shipped via UPS Ground, please locate the zone where the Ship-To address for your order is located. Note the color of that zone then check the number of days listed next to the color in the Transit Days Chart on the bottom right of the Zone Map. Please note that the delivery time is calculated beginning the day after your order has shipped.
- Low elevation
- Easy to cut and install
- Uses less thinset than other uncoupling products
- Provides uncoupling crack isolation properties
- Approved for wood and cement substrates
- Approved for use of modified thinset with porcelain tile
- Approved for all tile sizes including mosaics
- Apply loosely mixed modified thinset mortar to the substrate using a 5⁄16″ v-notched trowel.
- Apply blanke secumat to the substrate and embed mat with float or roller.*
- Work thin-set mortar into the surface of blanke secumat and set the tiles.
- Remember to install perimeter joints and blanke expansion joints per tcna guidelines ej171.**
Be the first to review “Blanke SECUMAT Mat”
You must be logged in to post a review.
Reviews
There are no reviews yet.