SpecialityValve is a reputed top entry ball valve manufacturer in Mumbai. The valves that assemble the ball from the top end are known as top entry ball valves. It's similar to a globe valve in that it has a body and a cap, but the trim is made of a ball type. It is made up of a single component. The top entry ball valves are usually composed of cast metal. Because it is created from casting, further NDE testing would be required to guarantee that the casting process is defect-free. Top input ball valves are frequently employed in applications where only minimum disassembly is required for in-line repair of internal components. High-pressure ball valve inputs, which require continual maintenance, are also quite prevalent. However, the valve can be set anywhere between fully open and totally closed, allowing for more accurate flow control. Ball valves typically feature two ports: an intake port and an exit port. But three ports (L or T) are also available; how they are used will depend on how the valve is put up and placed. These three ports will dictate how the 90-degree rotation of the ball directs the media flow. Although uncommon, four-port ball valves are conceivable. In a ball valve, the ball is linked to a valve stem, which regulates the rotation of the ball. To operate the valve, the valve stem is attached to a manual handle. Advantages of Top entry ball valve • Fluid resistance • Simple structure and light weight • Reliable sealing • Convenience for operation and maintenance • Quick open and close Industries that uses top entry ball valve • Oil and gas • Chemical • Refining • Paper and pulp • Petrochemical Description Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M , F55, F51, F53, Monel, Ductile Iron. Available Size: 1/2 to 48 Class: 150 to 2500 Nominal Pressure: PN10 TO PN450 End Connection: Flanged, Threaded, Buttweld, Socketweld Medium LNG, Cryogenic application, Water, Air, Steam Operation: Lever, Gear, Electric Actuated, Pneumatic Actuated For more visit https://www.specialityvalve.com/product-category/top-entry-ball-valve/ Motorized ball valve manufacturer in Mumbai SpecialityValve is the best known motorized ball valve manufacturer in Mumbai. A motorized ball valve use an electric motor to move a ball valve through 90 degrees, converting electrical energy into rotary force. They are an energy-efficient, clean, and silent valve control technology. An alternating current (AC) or a direct current (DC) electric motor can be used. It is housed in a strong, compact housing that also contains other actuator components such as gearings, limit switches, wiring, etc. The valve is opened and the media can flow through when the open portion of the ball is in line with the flow. The valve closes when the solid portion of the ball is parallel to the flow, which is accomplished by rotating the ball 90 degrees. Actuator overview A gadget called a valve actuator is utilised to remotely control a valve. The actuator is referred to as a quarter-turn actuator if it manages a quarter-turn valve. You can put an actuator on the valve to automatically and/or remotely control it in place of a manual lever. The torque needed to operate (rotate) a ball valve is produced by actuators using a power source. Electric actuators Electric actuators employ an electric motor to rotate a ball valve through 90 degrees, converting electrical energy into rotary force. They are a silent, clean, and energy-efficient technique of controlling valves. Direct current (DC) or alternating current (AC) can both power the electric motor (DC). It is contained in a sturdy, small housing along with other actuator parts including gearings, limit switches, wiring, etc. Through an appropriate connection interface, the entire assembly is connected to a valve. Advantages of Motorized ball valve • Provide leak proof service • Open and close quickly and easy to use. • They are lighter than gate valves • These valves are available at different sizes and shapes • High quality material • Safe under high temperature and high pressure conditions • They needs less force to operate Industries that use Motorized ball valve • Oil • natural gas • manufacturing sectors • chemical storage • Water & steam Description Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M , F55, F51, F53, Monel, Ductile Iron. Size: ½” to 48” Class: 150 to 2500 Nominal Pressure: PN10 to PN450 Operation Electric Actuated End Connection : Flanged, Threaded, Buttweld, Socketweld Medium LNG, Cryogenic application, Water, Air, Steam For more visit https://www.specialityvalve.com/product/electric-actuated-2-piece-screwed-ball-valve/
